-
-
L0rdGwyn replied to the thread Aegis DIY Tube Headphone Amplifier.The ripple current ratings of these low capacitance electrolytics aren't going to cut it unfortunately, you're going to have to use a...
-
L0rdGwyn replied to the thread ZMF Aegis Official Thread.Thanks for the feedback! Glad you're enjoying it. Great pics too. I'll have to look for an opportunity to demo the RAD-0.
-
L0rdGwyn replied to the thread Aegis DIY Tube Headphone Amplifier.I think that's overly conservative but if he insists lowering the cap value to 4uF will slightly lower the B+ voltage and increase the...
-
L0rdGwyn replied to the thread Aegis DIY Tube Headphone Amplifier.10uF 450VDC should be fine, if you want to derate higher than 450VDC you can. Here is a 10uF 500VDC 12,000hr option...
-
L0rdGwyn replied to the thread Aegis DIY Tube Headphone Amplifier.They will likely be fine, but it's one of those things you can't really judge from a spec sheet. The concern is the inrush current on...
-
L0rdGwyn replied to the thread Aegis DIY Tube Headphone Amplifier.The 4uF limitation assumes you are running the rectifier at its maximum specified voltage (450V) and current (160mA), the spec can be...
-
L0rdGwyn replied to the thread Aegis DIY Tube Headphone Amplifier.And here I thought you might be leaving the Aegis club, but you're actually going to build a second lol.
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…